DINITROL 1000 is designed for application in closed cavities, doors and other parts of cars, trucks and buses. The product is particularly suitable for use at import plants, during truck and bus manufacture and in the aftermarket. DINITROL 1000 is also designed for use on spare parts etc, which are stored for long periods or transported under very corrosion inductive weather conditions. Transparent High penetration Polyethyelene wax base Highly water repellent Excellent low temperature properties Re-wash resistant 1 Litre DINITROL 1000 is designed for application in closed cavities, doors and other parts of cars, trucks and buses. The product is particularly suitable for use at import plants, during truck and bus manufacture and in the aftermarket. DINITROL 1000 is also designed for use on spare parts etc, which are stored for long periods or transported under very corrosion inductive weather conditions. DINITROL 1000 is applied by spraying with manual or semi-automatic application equipment, and is suitable for either air-mix or airless spraying. Application temperature should be between 15 and 30°C. Colour: Opal to beige transparent Type of film: Waxy Density at 23°C: 830 kg/m³ Viscosity at 23°C, DIN 4: 18 s Dry matter content: 50% by weight Flash point: 40°C Aromatic content in solvent: < 1% Rec film thickness: 40 μm Drying time: 2 h Low temperature adhesion: – 40°C Effect on car paint None Removability: White Spirit Heat resistance: > 90°C Salt spray test: 500 h Penetration 50 µm gap: > 30 mm
