Description Penrite Running In Oil is a premium mineral, SAE 15W-40, non friction modified, low detergent & dispersant engine oil, designed for the critical running in period for both new and re-built engines. It contains an advanced anti-wear additive pack featuring high zinc for ultimate engine wear protection during these first stages of engine use. The high zinc (exceeding 1600 ppm levels) formulation protects the valve train including camshafts, followers, rockers and pushrods. It allows the piston rings to bed in correctly with the cylinder walls, preventing glazing of the bores and it can be used for both dynamometer and normal road run in procedures. Application If used for running in on the road, the suggested running in period is approximately 300 miles after which both the oil and filter should be changed. Penrite Running In Oil may be used in engines where SAE 15W-40, 20W-40, 20W-50 & SAE 30 viscosity grades are specified by the manufacturer. It is designed to be used over a wide range of engine oil viscosities. It’s 15W-40 viscosity allows for use in both new and older type engines Benefits Full zinc additive package for superior engine wear protection Non friction modified allows running in process to complete totally Prevents glazing of the engine cylinder bores Multigrade viscosity covers various SAE viscosity grades and wider engine range Low detergent & dispersant level Allows bedding in of the piston rings with the cylinder walls Suitable for competition and on road use Characteristics Penrite Running In Oil SAE Viscosity 15W-40 Viscosity Index (VI) 140 Performance Level API: SF / CC Zinc as ZDDP (ppm) 1610 Base Oil Group Grp II Detergent dispersant package Nil Other –
